Modern Table Lamps for Living Room & Bedside

As a starting point, the surface height plus the lamp height should total about 58-62 inches for a bedside lamp and 60-64 inches for a sofa-side end table, so the shade's lower edge sits around chin level when seated. Console lamps run a little taller, 62-68 inches combined. For exact numbers based on your own furniture, use our table lamp size guide and calculator.

For comfortable reading choose a lamp delivering 800 to 1,100 lumens, roughly the output of a 60 to 75 watt incandescent bulb. For ambient or accent light on a console or sideboard, 400 to 800 lumens is plenty. Warm white at 2700K to 3000K suits living rooms and bedrooms, while 3500K to 4000K keeps text and detail crisp at a desk. A dimmable lamp covers both uses from a single fixture, which is why most of this collection ships dimmable.

A balanced shade measures about twice the width of the lamp base at its widest point and roughly one third of the lamp's total height. As a cross-check, the shade's bottom diameter should be at least as wide as the base is tall, and the shade must conceal the socket and harp completely at eye level. For a 26-inch lamp that works out to a shade around 8 to 9 inches tall and 14 to 16 inches across the bottom.

Models with integrated LED modules include stepless touch dimming or a rotary dimmer on the base. Lamps taking replaceable bulbs use standard E26 sockets for the US and accept any dimmable LED bulb up to the wattage on the label, typically 40 to 60 watts equivalent. Check the specification tab of each product for the exact socket. Cordless rechargeable lamps in this collection run 6 to 20 hours per charge depending on brightness level and recharge over USB-C in about 4 hours.

Wipe marble with a soft, barely damp cloth and dry it at once. Marble is porous, so avoid vinegar, citrus and any acidic cleaner — they etch the surface permanently. Blot spills instead of wiping so liquid does not spread into the stone. Crystal and glass bases clean well with a cloth misted with one part isopropyl alcohol to three parts distilled water. Never submerge an electrified base or allow moisture to reach the socket or cord entry.