We will send you an email to reset your password.
Flush mount chandeliers combine the sparkle of a chandelier with a low-profile ceiling fit — ideal for bedrooms, hallways, kitchens and rooms with low ceilings where a hanging fixture will not work. This collection spans modern, crystal and large flush mount chandeliers in brass, gold, black and chrome, from compact semi-flush designs to statement ceiling pieces. Elegant light with minimal drop.
from $1,104.00
from $870.00
from $840.00
from $626.00
from $1,615.00
from $690.00
from $557.00
from $828.00
from $1,455.00
from $932.00
from $997.00
from $329.00
from $1,702.00
from $1,104.00
from $1,130.00
$710.00
from $642.00
from $440.00
from $275.00
$723.00
from $672.00
from $644.00
$1,779.00
$609.00
from $362.00
from $420.00
from $682.00
from $610.00
from $610.00
from $465.00
from $800.00
from $697.00
from $610.00
from $440.00
from $615.00
from $322.00
Add your room's length and width in feet and read the total as inches for the fixture diameter: a 12 by 14 ft bedroom suits a 26-inch flush mount. Rooms under 100 sq ft, such as a small bathroom or entry, usually take 12 to 16 inches. In a long corridor use two or three smaller fixtures spaced 6 to 8 feet apart rather than one oversized piece. As a sanity check, keep the diameter under about one third of the shortest wall length.
Flush mount chandeliers are made for ceilings of 8 feet or lower, where a hanging fixture would cut into head height. A true flush mount sits tight against the ceiling and drops only 4 to 8 inches. Semi-flush designs hang 8 to 14 inches below the ceiling and suit 9-foot rooms, adding depth and sparkle without the reach of a pendant. Standard practice keeps at least 7 feet (84 inches) of clearance from floor to the bottom of any fixture in a walkway.
Plan on about 20 lumens per square foot in a bedroom or hallway and 30 to 40 lumens per square foot in a kitchen or bathroom. A 150 sq ft bedroom therefore wants roughly 3,000 lumens, while a kitchen of the same size needs 4,500 to 6,000. Choose 2700K to 3000K warm white for bedrooms and living areas, and 3000K to 4000K where task visibility matters. Dimmable models let one fixture cover both jobs across the day.
Yes, as long as the rating matches the zone. Clear of the shower or tub, a standard fixture is fine. Directly above a shower or bath, use a fixture rated at least IP44 for splash protection, and IP65 where it will meet direct spray. Each product's IP rating is listed on its specification tab. Keep the usual 7 feet of floor clearance, and check local code for the required distance above the tub rim before mounting.